About

Carbide/tungsten coated sanding tools are extremely long-lasting, and can be used for sanding and the surface treatment of a wide range of materials, as: glass fibre, paint, rust, wood, concrete and much more.

Carbide’s long life and effective sanding qualities saves time and improve results. The tools can be used for industrial purposes, as well as for fine finishing jobs.

Carbide coating’s sharpness and other unique properties prevent material from building up on the sanding and grinding tools.

If material build-up does occur, it is easily removed using a metal brush or a cleaning solvent and used up to 150 times longer than traditional sandpaper and is much more efficient and time-saving than traditional methods.

The grinding tools are available in grain sizes from 3 to 240, and therefore can cover almost all grinding needs.

With Carbide grinding tools, you can really grind through – regardless of material is dry or wet.

Carbide is the name of our company. But it is also the name of a sintered metal. The metal is also known as tungsten, which is the basic element of our tools – an extremely hard metal having approx. 95% of the hardness of an industrial diamond.

The abrasive consists of grains of carbide of a particular size depending on the purpose which are welded onto a steel base.
These small metallic grains are the abrasive medium, making carbide extremely durable compared to sandpaper.

FAQ

Yes, we produce abrasive floor grinding discs. Due to the sharpness of the abrasive disc, we recommend that you start with a finer grit. After sanding part of the floor you can look at the results and determine whether you should increase grit size.

Lacquer and varnish are no problem to remove. Just use the machine at low speed with few revolutions and avoid pressing down too hard against the floor, as this will cause the floor surface to heat up and become sticky. In the case of soft lacquers and varnish, stickiness cannot be avoided. But this is not a problem. Just take the pads off, clean them with a solvent and use them again and again.

No, steel and granite are practically the only materials that Carbide tools cannot be used on. The abrasive tools can, however, be used for sanding on the outside of steel – on paint or rust coatings, but not into the material itself, as the abrasive surface of the tools are simply too hard. However, you can sand and grind on aluminium surfaces using carbide tools.

Yes we have, please click on the link “Recommended Grit Sizes”

Safety instructions

Carbide abrasive tools are designed to treat surfaces and remove material fast and effectively. To ensure your safety when using Carbide abrasive tools, carefully read the user guide and safety warnings and follow all instructions: If you have any questions on how to use Carbide sanding and grinding tools, please do not hesitate to contact us.

Open Safety Instructions

Carbide Catalogs

English – Overview

German – Übersicht

French – Présentation

Recommended grit sizes

Hand Tools
Power Tools
Floor Grinding
Summary

Sold by all leading large construction markets, DIY stores and webshops

Carbide’s products are sold by professional building wholesalers and building and hardware retail stores.

We are confident that your local dealer can provide you with the best service and professional advice about our products.

Should you have special needs, then we will be pleased to answer any questions about Carbide sanding and grinding tools.

Design, quality and customer satisfaction are important objectives of our strategy. Carbide works in partnership with our customers, providing advice on how to use Carbide tools and working with them to innovate new specialty products.

Carbide products are individually packaged in clear blister packing, which makes it easier to view the product.

Contact us